SPECIFICATION:

• Maximum output @0.03% THD > 1500 W /1 ohm
• 2 ohms RMS output @0.08% THD > 800 W / 2 ohm
• 4 ohms mono output @0.5% THD > 500 W / 4 ohm
• Low pass filter > 40Hz - 250Hz
• Subsonie Filer > 15Hz-40Hz
• Frequency response > 20-500Hz
• Signal to noise ratio 80dB
• Stereo separation > N/A
• Input sensitivity > 200mV.-6.0V
• Input Impedance > 22 kohms
• Operation voltage > DC12V
• Speaker impedance@stereo driven > 10Ohms
• Remote control >Optional
• Fuse rating 30A x 3
• Dimension (WHD)mm > 380x55x235

• FULL MOSFET CLASS D POWER AMPLIFIER
• 2 INPUT/MONO CHANEL OUTPUT
• VARIABLE SUBSONIC FILTER (15Hz-40Hz)
• VARIABLE LOW PASS FILTER (40Hz-250Hz, 24Db per Oct.)
• WIRED REMOTE CONTROL (optional 5 meter volume wire)
• LOW CURRENT CONSUMPTION
• LOW HEAT GENERATION (PERFORMANCE MORE THAN 85%)
• FULLY 1 OHM STABLE OPERATION
• TWO SPEAKER OPERATION
• CROSSOVER SLOPE (24dB per Oct)
• LINE OUT RCA LINE
• SUPER BASS CONTROL : 0-12dB At 45 Hz
• LINE OUT RCA LINE
• BUIL-IN OVERLOAD PROTECTION CIRCUIT
• BUIL-IN OVER CURRENT PROTECTION CIRCUIT
• BUIL-IN OVERHEAT PROTECTION CIRCUIT
• TRANSPARENT POWER AND SPEAKER TERMINALS
• THERMAL, OVERLOAD,
   SHORT CIRCUIT AND DC OFF-SET PROTECTION